2024 ASTEC Mobile Screens Peterson 5050H Electric Whole Tree Chipper Base

Information

2024 ASTEC Mobile Screens Peterson 5050H Electric Whole Tree Chipper

The stationary, electric Peterson 5050H Delimber Debarker Disc Chipper produces high quality low bark content chips for wood pulp and pellets, processing whole trees in one continuous operation.

Equipped with a large feed throat, the 5050H can accept up to a 23-inch (56 cm) diameter single tree or multiple smaller stems.

Chipping production rates up to 150 tons (136 tonnes) per hour can be achieved depending on chip size and wood characteristics.

Photos

Highlights

  • Rapid City, South Dakota
  • 2024
  • ASTEC Mobile Screens
  • Peterson 5050H Electric Whole Tree Chipper Base
  • Available
  • Operating: 11' 9" | Travel: 13' 6"
  • Travel: 11' 7" | Feed Opening: 24"

Specifications

  • 2024
  • ASTEC Mobile Screens
  • Peterson 5050H Electric Whole Tree Chipper
  • Base
  • General
  • CAT
  • 950 hp or 1050 hp
  • Axle Spacing: 60" | Maximum Log Diameter: 23" | Drum Size: heavy duty, 66" diameter | Chip Size: 1/2" to 1 1/4" | Grapple with Heel Rack: 360° rotation, 42" | Drum Diameter: 11" | End Discharge Bark Mover: 120" x 24"
  • Operating: 51' 3" | Travel: 53' 6" | Frame: 50' 6"
  • Operating: 11' 9" | Travel: 13' 6"
  • Travel: 11' 7" | Feed Opening: 24"
  • 13" | Front: 2' 11" | Rear: 10"
  • Front to 5th Wheel: 1' 8" | 5th Wheel to Center Axle: 41' 9" | 5th Wheel to Rear Axle: 46' 9" | 5th Wheel Height: 4' 2"
  • 375 gal
  • 320 gal
  • tri-Axle Weight: 59,960 lbs | 5th Wheel Weight: 45,000 lbs | Total Weight: 103,500 lbs