2024 ASTEC Mobile Screens Peterson 2750D Electric Horizontal Grinder Base

Information

2024 ASTEC Mobile Screens Peterson 2750D Electric Horizontal Grinder

The 2750D electric horizontal grinder is ideal for operations that can take advantage of stationary or semi-stationary operations.

Powered by a single 600 horsepower (450 kW) electric motor, the Peterson 2750D has plenty of power. Since electric power costs are typically much lower than diesel fuel costs, electric power may just be the answer for increasing your profits. With a feed opening of 60¾ x 32 inches (154 x 81 cm) combined with Peterson’s high lift feed roll.

Photos

Highlights

  • Rapid City, South Dakota
  • 2024
  • ASTEC Mobile Screens
  • Peterson 2750D Electric Horizontal Grinder Base
  • Available
  • Operating: 9' 1" | Travel: 9' 1" | Rotor: 60" | Discharge Conveyor: 48"
  • Operating: 16' 9" | Travel: 11' 6" | Discharge Conveyor: 16' 9"

Specifications

  • 2024
  • ASTEC Mobile Screens
  • Peterson 2750D Electric Horizontal Grinder
  • Base
  • General
  • Rotor Drive Motors: crusher duty, 2 x 600 hp | Hydraulic System Motor: high efficiency 100 hp
  • 460 volt, 60Hz, 3-phase electric
  • Travel Speed: 1.0 / 2.0 mph | Rotor Speed: 10,000 fpm @2100 rpm | Conveyor Speed: 500, 600, or 700 fpm
  • Production Greenwaste: 264 yd³, 77 tons | Production Scrap Board: 323 yd³, 55 tons
  • Axle Spacing: 60" | Rotor Diameter: 32" | Rotor Shaft Size: 5" @ bearing, 5.75" @ center | Bit Size: 2.75" x 5" | Total Grate Area: 21 ft² | Grate Coverage: 180º | Grate Thickness: 1"
  • Operating: 52' 6" | Travel: 39' 11" | Frame: 38' 6"
  • Operating: 9' 1" | Travel: 9' 1" | Rotor: 60" | Discharge Conveyor: 48"
  • Operating: 16' 9" | Travel: 11' 6" | Discharge Conveyor: 16' 9"
  • 10 "
  • Front to 5th Wheel: 5' 11" | 5th Wheel to Center Rear Axle: 30' 9" | 5th Wheel Clearance Radius: 6' | 5th Wheel Height: 3' 8"
  • 95 gal
  • Machine Weight Approx.: 54,000 lbs | 5th Wheel Weight: Approx: 21,000 lbs | Tandem Axle: Approx. 33,000 lbs
  • Number of Bits: 20 drum rotor, 18 pinned rotor, 30 ASG rotor | Number of Grate Sections: 4